Macerator Pump - PP10-24453-04X:
The Johnson Pump TA3P10-19 Macerator pump takes care of the toilet waste, shredding it before it is pumped into or out from the holding tank.
The pump should be connected as close as possible to the holding tank discharge outlet or the bowl discharge outlet.
Note: use unbleached lavatory paper only!
Item No. | Description | Capacity at 0.2 bar (6.7ft) | Amperage | Fuse Size | Inlet Connection | Outlet Connection |
10-24453-04 | TA3P10-19, 12V Macerator | 37 L/min - 10 GPM | 15 A | 20 A | 1-1/2" Dia (38mm) hose or 1-1/2" BSP | 1" (25.4mm) Hose |
10-24453-05
| TA3P10-19, 24V Macerator
| 37 L/min - 10 GPM
| 7 A | 12 A | 1-1/2" Dia (38mm) hose or 1-1/2" BSP
| 1" (25.4mm) Hose |
Technical Features:
• Ignition protected motor, conforming with ISO 8846 Marine
• Mounting bracket for easy replacement
• Rotary cutter casing of PET (thermoplastic polyester)
• Directly connected to sewage line or holding tank
Design features:
Pump body: Phenol plastic (PF)
Impeller: Nitrile
Cutter casing: Thermoplastic polyester (PET)
Shaft: Stainless steel
Seal: Lip seal
Voltage: 12 V or 24 V DC
Hose connection: Inlet 1 1/2" (Ø 38 mm) hose or 1 1/2" BSP Outlet 1" hose (Ø 25.4 mm)
Motor: 12/24V (with built-in thermal protection)
Length: 230 mm - 9.06"
Width: 108 mm - 4.25"
Height: 82 mm - 3.23"
Weight: 1.9kg - 4.2lbs
Reference:
TA3P10 12 V 13 - 15 amperage 20 amp (fuze size)
TA3P10 24 V 7 - 8 amperage 12 amp (fuze Size)