Costiera T.F. Antifouling - Hard Matrix - 0.75 Liter - Blue Notte - Dark - Blue Color - B65528-075 - AEMME

Costiera T.F. - Hard Matrix - 0.75 Liter - available in Black, Dark Blue, or red Color - B65528-075 - AEMME:

Hard antifouling secure reliability with a high percentage of cuprous oxide and ideal special substances for use in any type of sea.

It provides reliable protection to the hull, after the application of a suitable primer.

It is applied to wooden hulls, iron, and fiberglass (not suitable for aluminum hulls).

Ideal to speed even over 30 nodes.

Available colors: Black, Dark Blue, Light Blue, and Red.

USAGE:

PREPARING THE SURFACE AND APPLICATION CYCLE:

Hulls in new iron. Of iron sandblasted to grade 2.5 applies a coat of two-component EPOZINC 2C, letting it dry for 12-24 hours. (If it is not possible sandblasting is recommended to mechanically bring the iron again, clean the surface and apply one coat of CROMOMINIO-AT, leaving to dry for 8-12 hours.) Then apply two coats of PRIMER SOLVER 24 hours between of them. Overpainted with 2 coats of antifouling COASTAL T.F. at a distance at least 8 hours apart.  

Hulls in new wood. Apply a CROMOMINIO-AT dry hand and leave for 8-12 hours. Apply 2 coats of PRIMER SOLVER 24 hours of each other, then two coats of antifouling COASTAL T.F. at a distance of at least 8 hours apart. 

Hulls already painted. If the old antifouling is in good condition and well anchored simply apply one or two coats of PRIMER SOLVER, first with 2 coats of varnish over COASTAL T.F. at a distance of at least 8 hours between coats. 

Fiberglass and plastic. Decrease with detergent and water and rinse. Sand lightly with fine sandpaper and remove dust. Apply a POLY FIBER PRIMER and after 24 hours sand with fine sandpaper. then apply two coats of COASTAL T.F. at a distance of at least 8 hours apart.