Archimede 2 - CO-CKS764110 - Cressi

The latest version of the Archimede computer, aesthetically redesigned and complete with new and sophisticated software that during the dive can manage two different Nitrox mixes, which can be selected at any time of the actual dive.

The already excellent features of Archimede have been considerably improved both for scuba divers and for free divers who have the new GAUGE function as an indispensable instrument that can monitor all their dives in detail.

 Technical Features:

-Bühlmann ZH-L8 algorithm, redesigned by Randy Bohrer to make it suitable for a more sophisticated RGBM program.

The result is an algorithm that is very similar to the ZH-L16, but less penalizing regarding water temperature and repeated overshooting of the ascent speed. 

-Compartments: 12 with saturation half times of between 5 and 640 minutes 

-Diameter: 62.3 mm 

-Thickness: 24.7 mm 

-Salt water calibrated 

-Display range: 0 – 99.9 m (0-199.9 in Gauge function) 

-Accuracy: +/- 3% +0.5 m 

-Resolution: 0.1 m 

-Maximum surface time: 48 h 

-Altitude monitoring: every 10 min 

-Altitude range: from 0 to 6000 m 

-Thermometer with resolution of 0.1 °C 

-Accuracy: +/- 2°C 

-Display range: -5°C/ + 40°C 

-3V CR 2032 battery at Li/MnO2, easy to find and low cost 

-Battery life: about 2 years with 50 dives per year 

-Battery replacement by user, without needing equipment 

-Back light display for 5 seconds (pushing a button) 

-Replaceable display protection screen 

-Can be used with air or Nitrox (choice of 2 different mixes in the same dive) 

-Adjustment of oxygen fraction from 21% to 50% with 1% increase for the first mix and from 21% to 99% for the second mix -Partial pressure adjustment of oxygen from 1.0 to 1.6 bar, with 0.1 bar increases for both mixes. 

-Possibility of setting a personal safety factor that can be selected on 3 positions (0, 1, 2) 

-Possibility of setting an alarm for a certain depth 

-Bar graph for Nitrogen saturation 

-Bar graph for CNS oxygen toxicity 

-Ascent speed indicator at 4 levels + SLOW + audio alarm when maximum speed is exceeded.

There are 3 maximum ascent speeds that decrease progressively as the diver approaches the surface: 16 m/min up to 18 m,12 m/min from 18 to 6 m, 8 m/min from 6 m to the surface. 

-Audio and visual alarms for: 

1.nearing NDT (no decompression time)

2.need for decompression stops 

3.too high PO2 level 

4.nearing limits of CNS O2 toxicity 

5.too fast ascending speed 

6.exceeding computer limits 

7.not respecting decompression depth 

8.exceeding depth set by user 

-Decompression stages provided for down to 30 m 

-3’ safety stop at the end of every dive over 10 m deep (not compulsory) 

-Date and time incorporated 

-Gauge function (only present and maximum depth, dive time (minutes and seconds), ascent speed, time.

 Functioning to 199.9 m 

-Logbook of the last 30 hrs of a diving or the last 60 dives, with 3 data displays for each dive 

-Past memory of total number of dives, hours spent underwater and maximum depth reached 

-Profile of every dive (without interface) 

-Data transfer to PC (with optional interface) 

-Complete scrolling of NDL times down to 48 m 

-Simulator for air or Nitrox dives, for single or repetitive dives, complete with alarms and every other function, settable using independent buttons, both for descent and ascent 

-Possibility of general reset so computer can be used by a diving center 

-Possibility of changing from metric to imperial measuring units and vice versa