Stripcarena Paint Remover - 0.75 LT - 7K60150-075 - AEMME

Stripcarena Paint Remover - 0.75 LT - 7K60150-075:

Stripcarena is a water-thinable antifouling remover formulated with non-toxic compounds.

Stripcarena can remove the old antifouling from fibreglass without impairing the gel coat.

The product is ready for use and is applied at the thickness required to penetrate the old antifouling.

Once applied should be left to work for approx. 1-2 hours .

Remove then the old paint by means of a scraper or using a water jet.

If necessary repeat the process.

Liquid color: Light Green (VERDE CHIARO)

SURFACE PREPARATION AND APPLICATION PROCEDURE 

Fibreglass coated with antifouling.

The product is applied by brush, preferably at a high thickness depending however on the antifouling layer to be removed.

Once applied let stand for 1-2 hours.

Remove then by scraper or by using a water-cleaner equipment.

In case of high thickness of antifouling to be removed it may be necessary to repeat the process.

When the paint has been finally removed, rinse the surface very well with water using a synthetic or vegetal wirebrush. 

SAFETY PRECAUTIONS:

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request.

For further information please do not hesitate to contact our technical staff.

NOTES:

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information.

Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use.

Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.