Black Box VHF/DSC Marine Transceiver M400BB Built-in Class D DSC - M400BBE-V37 - ICOM

0 reviews / Write a review

Brand: ICOM
Product Code: M400BBE-V37
Availability: In Stock

$711.71
Ex Tax: $711.71

Qty

Add to Wish List

Add to Compare

Black Box VHF/DSC Marine Transceiver M400BBE Built-in Class D DSC - M400BBE-V37:

Black Box Transceiver When Space is at a Premium

Space-Saving, Two-Piece Configuration

The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation can be made from the COMMANDMIC™, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place.

New Intuitive User Interface

The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons.

Active Noise Cancelling

The built-in bidirectional active noise canceling reduces background noise by up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly.

10 W Loud Audio, Public Address, and Foghorn

The IC-M400BB has a built-in 10W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loudspeaker, and the foghorn can also be emitted from the external speaker.

Built-in Class D DSC

The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include distress, individual, group, all ships, urgency, safety, position request/report, polling request, and DSC test calls.

Built-in GNSS Receiver

A GNSS antenna is supplied with the IC-M400BBE.

Common NMEA Interface

When connected to an external GPS receiver, the current position and time are shown on the Commandmic display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity.

AIS Target Call with MA-510TR/MA-500TR

When connected to the optional MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR.

Other Features

* MarineCommander™ compatible
* AquaQuake™ water draining function (HM-195B/SW)
* IPX7 waterproof protection both for IC-M400BB and HM-195B/SW (1m depth for 30 minutes)
* Dual/tri-watch function for monitoring Ch.16 and/or call channel
* Priority and normal scan

Supplied Accessories

* COMMANDMIC, HM-195B/SW*
* DC power cable
* GNSS antenna
* 6.1 m (20 ft) of cable*, OPC-1540 between HM-195B/SW and IC-M400BBE
* Mounting base for cable connector*
* Microphone hanger*

* COMMANDMIC, HM-195B (black color) or HM-195SW (white color) is supplied depending on the version.

Optional Accessories

> SP-37 ---> Horn Speaker

> OPC-1541 ---> Extension Cable

Applicable IP Rating
Ingress Protection Standard	M400BB
Water	IPX7 (Waterproof protection)
GENERAL
Audio output power (at 10% distortion, 4Ω load)	More than 2W (HM-195B/SW) More than 10W (RX speaker)
Current drain	Tx 25W output: 5.5 A Rx Max. audio: 3.5 A
Dimensions (W×H×D) (Projections not included)	IC-M400BB: 216×79×125 mm HM-195B/SW: 67.5×144.5×37 mm
Frequency range	Tx: 156.000–161.450 MHz Rx: 156.000–163.425 MHz CH70: 156.525 MHz
Intermodulation	Main: More than 68dB DSC: More than 68dBμ emf (1% BER)
Power supply requirements	13.8V DC nominal (10.8–15.6V DC)
RF output power	25W, 1W
Sensitivity	Main: −5dBμ emf typ. (20dB SINAD) DSC: −4dBμ emf typ. (1% BER)
Weight (approximately)	M400BB: 830 g HM-195B/SW: 400 g

Write a review

Tags: VHF, Communication Devices, Handheld, Marine, Transceiver, Waterproof, Class D, GPS, Black, Box,

Developed by Software Senior

Top