Mount Remote Control Box for Mercury and Mariner, Right Hand - 881170A13:
A handle mounted trim switch and a 15' harness with 14 pin Deutshe connector and will direct connect to the engine models below without the use of an adapter harness.
Throttle/Shift cables (896143A) for 8, 9.9 hp, 4-stroke outboards (MY2005 & Newer).
8, 9.9 hp, 4-stroke engines generation change above S/N OR192772 and new 15/20 hp, 4-stroke engines will use Gen I series T/S Cables 25-300 hp, 4-stroke ('06).
Any engine that has the 14 pin connector from the primary harness.
Gen I cables are required with this control
Right Hand
Has a handle mounted power trim switch and a 15ft (4.58 m) harness with 14 pin Deutshe connector and will direct connect to the engine models below without the use of an adapter harness.
Fit Mercury Outboard Remote Controls and Components Side Mount 1994 & Up - Cat.# 90-8M0125572 Remote Control-4000 Side Mount(Power Trim)
Does not include throttle & shift cables.
Required Throttle/shift cable Gen I 897977A__.
Throttle/Shift cables (896143A) for MY2005 and newer 8/9.9 Four Stroke outboards.
8,9.9hp 4-Stroke engines generation change above S/N OR192772 and new 15/20hp 4-Stroke engines will use Gen I series T/S Cables
2006-newer 25-300HP 4-Stroke Mercury, any engine that has the 14 pin connector from the primary harness.
Gen I cables are required with this control