Star teak protettivo - Protective oil - 6D4597X - AEMME

Star teak protettivo - Protective oil - 6D4597X:

Solvent based protective teak oil sealer specifically formulated for the treatment and maintenance of teak and other precious woods, providing suitable protection from the sun and from weather exposure in marine environment.

Particularly used on boat decks made of teak or similar woods.

STAR TEAK PROTETTIVO (Sealer) is part of the Star Teak Line, also including Star Teak Sbiancante (Brightener) and Star Teak Detergente (Cleaner).

Available in the amber version (Star Teak Protettivo cod.6D4892) or in the colourless version with UV filters added (Star Teak Protettivo UV cod.6D4597)

Available colors: Transparent and Amber.

USAGE:

SURFACE PREPARATION AND RECOMMENDED COATING SYSTEM

New Wood. The surface should be clean, dry and sandpapered. Remove dust. Apply a first coat of STAR TEAK PROTETIVO (Sealer) by brush or by a soft pad evenly all over the surface and let dry for 24 hours. In the caase of particular dry wood, repeat application few times allowing 1-2 hours between applications.

Old Wood. Wet the wood surface with fresh water and apply STAR TEAK DETERGENTE (Cleaner) evenly all over the surface and let it stand for 5-10 minutes. Any trace of grease or dirt should be removed using a nylon brush. Rinse with plenty of fresh water. In case it would be necessary to brighten the shade of wood or any blackish shade caused by the natural ageing of wood, then apply on the wet SURFACE STAR TEAK SBIANCANTE (Sbiancante) by brush. Use a nylon brush to brush off the surface, rinse with plenty of water and let dry for 24 hours. In case of difficult stains repeat the application with Star Teak Brightener. Apply STAR TEAK PROTETTIVO (Sealer) by brush or by a soft pad and let dry for 24 hours. In the case of particular dry wood, repeat application few times allowing 1-2 hours between applications. When hot temperatures are present  it can be necessary to repeat the application specially on those areas where ther wood is more worn out or dull.

SAFETY PRECAUTIONS:

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.

NOTES:

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.