Digital Battery Monitor JBNUM-II - JBNUMII-CPS3:
CRISTEC presents its battery control accessory: the JBNUM-II battery monitor.
The CRISTEC battery monitor is the only one on the market with a large graphic LCD display for optimum data reading: 62 x 44 mm (built-in backlight).
Its version includes a 250A shunt to simultaneously control the voltage, amperage and remaining capacity of a battery bank (i.e.: servitude) as well as the voltage of two other battery banks (i.e., starting and thruster).
The batteries can be in 12, or in 24 or in 48V, see mixed.
By adding optional shunt kits it is possible to fully control 3 battery packs simultaneously (or the flow of power sources such as a wind turbine or solar panels – voltage & current) and 2 extra battery packs.
This new battery gauge features an alarm that triggers when the preset low battery capacity threshold is reached and a dry contact for automatic control of a generating set.
PRESENTATION:
The following parameters can be set:
- Number of battery banks (or DC sources) to monitor
- Capacity of each battery bank (Ah)
- Alarm values (low capacity, low voltage and high voltage)
- Acoustic alarm (buzzer) and electrical contact ON/OFF
- Language (French or English)
- Backlight duration
TECHNICAL CHARACTERISTICS:
INPUT POWER-SUPPLY: from 8,5 to 60VDC
CONSUMPTION: without backlight /30mA ; with backlight /65mA
BATTERY OR DC SOURCE CAPACITY: from 5 to 4000Ah
MEASUREMENTS:
Battery or energy source voltage: from 0 to 60VDC
Current: from -500A to 500A
Display resolution: Battery voltage: 0.02V, Current: 0.1A, Temperature: 0.5 ° C,> Accuracy: ± 0.5%
Display: white graphic LCD 128 x 64 pixels, white LED backlighting
Alarms: buzzer, blinking backlight
Dimensions: 120 mm x 120 mm with 62 x 44 mm LCD display
Built area: H 95 mm x W 100 mm 35 mm x p
Temperature: Operating: 0 to + 50 ° C Storage: -10 to + 70 ° C
MADE IN FRANCE