DULON POLY POLISH RUBBING COMPOUND 13 - 0.5L -6-13005 - Dulon marine

DULON POLY POLISH RUBBING COMPOUND 13 - 0.5L -6-13005 - Dulon marine

 Polish – High Gloss Finish

16 – Fine
15 – Medium
14 – Strong
13 – Ultra strong

Professional polishing paste with a fine to ultra-strong granular formula. It restores (heavily) weathered, chalky, stained, and dull surfaces and it removes fine scratches and persistent stains and streaks. It can be used on hard surfaces like gel coats, painted steel and wood, and stainless steel. After application, protect the surface with DULON 1&2 or DULON PREMIUM BOAT WAX 19.

Restores weathered, chalky, stained, and dull surfaces to new ones.
Removes fine scratches and persistent stains and streaks.
Easy to apply & economical in use.
Can be used both manually or by machine.

ADDITIONAL INFORMATION

 Article Numbers / Packaging: 6-13005 | 0.5L, 6-13050 | 5L, 6-13250 | 25L
Available content: 0.5L, 5L, 25L
Tips & Tricks: -After treatment, protect the polished surface with the DULON 1 & 2 or DULON PREMIUM BOAT WAX 19.
-Use a concentric polishing machine with a hard polishing pad.
-Also suitable to use on your car, caravan, or camper.
C.R.P. indicator: Clean – Restore
Storage & Use: -DULON POLY POLISH RUBBING COMPOUND (500 ml) will treat 10-15 meter vessel.
-Store frost-free, in a dark and dry place.
-Ideal working temperature between de 5 en 25 degrees C.
-Do not use in direct sunlight.

Instructions: 

PRETREATMENT (if required)

• Use DULON HULL & WATERLINE CLEAN 22 to remove scale and brownish/yellow stains.
  
• Use PREDULON 00 to remove surface dirt, grease, oil, old wax, and silicon traces.

1. Apply DULON POLY POLISH with a damp microfibre cloth, polish pad, or sponge by circular motions, until the desired result is achieved.
   
2. Remove polish residue by using a dry microfibre cloth.
   

 POLISHING – MACHINE (concentric + hard polishing pad)

1. Lightly moisten the polishing pad (hard) and apply a small amount on the pad.
   
2. Spread DULON POLY POLISH thinly over the surface.
   
3. Polish the surface at low speed, in gentle, controlled movements – horizontally and vertically.
   
4. Increase rotation speed slightly during the polishing process until the desired result is achieved.
   
5. Remove the polish residue using a microfibre cloth.