Strainer Pro Kit - Built-In Flush Kit w/Straight Fitting - BA-45-486020:
Barr Marine's Sea Strainer Pro's (straight fitting) space saving design optimizes flow dynamics and since there is one integrated unit instead of two, there are fewer potential leak points.
Indmar also added an integrated O-ring to improve sealing capabilities and the units straight axial flow design enables water to flow more freely straight through the strainer and reduces flow loss which provides more water to be utilized by the engines cooling system.
Boat builders and consumers can easily and quickly install the technology on almost any inboard marine engine.
The inlet fitting can be oriented 360° to best serve the consumers needs.
When it’s time to strain and flush the engine, the patent-pending, permanently mounted onboard system flushes the engine easily with just one garden hose connection. The in-line strainer allows for easier basket removal. In addition, the material selection allows for 140° hot water flush for AIS flushing and the clear housing design provides higher visibility and encourages the boat owner in proper usage.
The two-in-one system give’s boat owners the ability to extend the life expectancy of their engine, cleans the entire raw water-cooling circuit and adds protection when operating in lakes with heavy vegetation.
•The first two-in-one sea strainer with a built-in flush kit system
•Extends the life expectancy of your engine, cleans the entire raw water-cooling circuit and adds protection when operating in lakes with heavy vegetation
•Available to boat builders and to consumers as an aftermarket part
•Can install technology on any inboard marine engine
NOTE:
This sea strainer will only work with raw water inlet systems that are equipped with 1-1/4" inside diameter hoses. If the boat is equipped with inlet water hoses that are not 1-1/4" ID, this strainer will not work.
- Made in USA