RETROFIT VERTICAL CABLE ENTRY - COLOR GREY + ABS CABLE GLAND W/ UV STABLE ADDITIVE / WIRE SIZE 2-10 mm - Up to 13.5 mm (5.3") diameter cable / Up to 20 mm (8.1") connector - CG20PG2 - Seaview

Description

The Seaview Retrofit Cable Seal is the only guaranteed and proven watertight installation for your currently installed cables! In a new category of its own, the new Retrofit Cable Seal provides a watertight installation for your currently installed cables. No need to re-run your cables, simply install with your cable in place!

The Seaview Retrofit Cable Seals provide a waterproof pass-through for antenna, transducer, lights, power and other cables without removal of the factory installed cable connector

These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Marine - Radars, satellite domes, cameras, lights and more!

Automotive - Seal the cables from your exterior lights going into your vehicle. Satellite domes for RV's.

Home - Easy installation to clean up current cables entering the house. Paintable shell to match the color of your house. Small in diameter and profile to fit in most applications. Extremely durable in all weather conditions.

   

 EASY INSTALLATION

Install with cable in place! No need to remove cable connectors or cable at all. Features captive nuts. All hardware provided for easy installation.

WATERPROOF

IPX6 and IPX7 waterproof rating. Uses a tapered watertight rubber seal and base gasket.

Download the Dimension in the chart below
DIMENSION DOWNLOAD

Download the installation instructions in the chart below
INSTALLATION INSTRUCTIONS